Picture keywords
(1) Scanning and curing the ceramic photosensitive resin paste with an ultraviolet laser galvanometer to form a three-dimensional ceramic body, and then degreasing and sintering at a high temperature to form a high-density, high-strength ceramic part.
(2) Use high volume content (50%) and high viscosity photosensitive resin ceramic paste to ensure that the components contained in the paste will not separate and settle for a long time, and the printed ceramic device has a consistent high density and high mechanical strength.
(3) The unique spray feeding mechanism and peristaltic residual material recovery mechanism are used to make the high-viscosity ceramic slurry flow smoothly from the cylinder to the workbench, and the residual material can be recovered in time.
(4) Using a unique variable angle scraper type ultra-thin slurry layer laying and scraping technology, the scraping angle can be optimized according to the viscosity of the ceramic slurry to ensure a uniform and even slurry layer with a thickness of 25 microns.
(5) The movement mechanism is equipped with a ceramic particle isolation device, so that there is no movement obstacle and blockage caused by the small ceramic hard particles in the slurry in the forming cylinder and the feeding mechanism.
The above is Xiaobian to organize related consultations on the characteristics of industrial-grade high-performance 3D ceramic printers. Through the sharing of this content, everyone has a certain understanding of the characteristics of industrial-grade high-performance 3D ceramic printers. If you want to For a more in-depth understanding of the market information of 3D ceramic printers, you can contact the salesperson of our company, or go to Hunan Xinshan Yuhang Additive Manufacturing Co., Ltd. for a site inspection and discuss the exchanges together.
Copyright © 2017-2024 Nanjing Wiiking 3D Technology Co., Ltd. All rights reserved. Privacy & Security Policies
